RE: [leafnode-list] RH 6.0 ./configure help !!

["Mike A. Lewis, CNE" <cajun@xxxxxxxxxxxx>]

Sure Cornelius.  I'll try it out for you and let you know later today.

Mike

> -----Original Message-----
> From: krasel@xxxxxxxxxxxxxxxxxxxxxxxxxxxx
> [mailto:krasel@xxxxxxxxxxxxxxxxxxxxxxxxxxxx]
> Sent: Sunday, June 20, 1999 12:38 PM
> To: leafnode-list@xxxxxxxxxxxxxxxxxxxxxxxxxxxx
> Subject: Re: [leafnode-list] RH 6.0 ./configure help !!
> 
> 
> Mark Brown wrote:
> 
> > On Sat, Jun 19, 1999 at 04:05:42AM -0700, Mike A. Lewis, CNE wrote:
> > > Moving leafnode-1.10b2 from RH5.2 to RH 6.0 and I get 
> errors when I do
> > > /configure.  What am I missing here ?
> > 
> > The new version of RPM in RH6.0 outputs information differently,
> > breaking the RPM detection in configure.  Unless you're planning on
> > building an RPM, you can just comment out the relevant section of
> > configure and re-run it.
> 
> If somebody out there has autoconf installed and is willing to give it
> a try, I would appreciate a test of the following configure.in instead
> of the old one. It has a different approach of detecting RPM 
> configuration
> paths.
> 
> ---cut here---
> dnl autoconf script for leafnode
> dnl written by Cornelius Krasel, 1999
> dnl Process this file with autoconf to produce a configure script.
> AC_INIT(leafnode.h)
> AC_CONFIG_HEADER(config.h)
> 
> dnl Checks for programs.
> AC_PROG_AWK
> AC_PROG_CC
> AC_PROG_INSTALL
> AC_PROG_MAKE_SET
> AC_PROG_RANLIB
> AC_CHECK_PROG( AR, ar, ar )
> AC_PATH_PROG( RPM, rpm )
> AC_PATH_PROG( GZIP, gzip )
> AC_PATH_PROG( FLEX, flex )
> if [ ! test -x "$FLEX" ] ; then
>   AC_PATH_PROG( FLEX, lex )
> fi
> AC_PATH_PROG( AUTOCONF, autoconf )
> 
> dnl rpm stuff
> if test -x "$RPM" ; then
>  AC_MSG_CHECKING(paths for rpm)
>  RPMSOURCEDIR=`$RPM --showrc | grep ^sourcedir | $AWK '{ 
> printf("%s",$3); }'`
>  SPECDIR=`$RPM --showrc | grep ^specdir | $AWK '{ printf("%s",$3); }'`
>  BUILDDIR=`$RPM --showrc | grep ^builddir | $AWK '{ 
> printf("%s",$3); }'`
>  RPMCMD="@./makerpm.sh ${RPM} 
> ${SPECDIR}"'/leafnode-$(VERSION).spec'" 
> ${RPMSOURCEDIR}"'/leafnode-$(VERSION).filelist'" ${BUILDDIR} 
> "'$(VERSION) $(USRDIR) $(BINDIR) $(MANDIR) $(LOCKFILE) 
> $(SPOOLDIR) $(LIBDIR)'
>  AC_MSG_RESULT(done)
> else
>  RPMCMD="@echo Unable to locate rpm"
>  AC_MSG_RESULT(failed)
> fi
> AC_SUBST(RPMCMD)
> 
> dnl flex stuff
> AC_MSG_CHECKING(flex)
> if test -x "$FLEX" ; then
>  FILTERUTILSRC='filterutil.l'
>  FILTERUTILPROD='filterutil.o:	'"${FILTERUTILSRC}"' leafnode.h'
>  FILTERUTILCMD1='	$(FLEX) -is -ofilterutil.c '"${FILTERUTILSRC}"
>  FILTERUTILCMD2='	$(CC) -c $(CFLAGS) filterutil.c'
>  AC_MSG_RESULT(done)
> else
>  FILTERUTILSRC='filterutil.c'
>  FILTERUTILPROD='filterutil.o:	'"${FILTERUTILSRC}"' leafnode.h'
>  FILTERUTILCMD1='	$(CC) -c $(CFLAGS) '"${FILTERUTILSRC}"
>  FILTERUTILCMD2=''
>  AC_MSG_RESULT(no)
> fi
> AC_SUBST(FILTERUTILSRC)
> AC_SUBST(FILTERUTILPROD)
> AC_SUBST(FILTERUTILCMD1)
> AC_SUBST(FILTERUTILCMD2)
> 
> dnl Checks for libraries.
> dnl Replace `main' with a function in -llnutil:
> dnl AC_CHECK_LIB(main)
> 
> dnl Checks for header files.
> AC_HEADER_DIRENT
> AC_HEADER_STDC
> AC_HEADER_SYS_WAIT
> AC_CHECK_HEADERS(errno.h fcntl.h fnmatch.h getopt.h limits.h 
> sys/time.h syslog.h unistd.h ap_config.h)
> 
> dnl Checks for typedefs, structures, and compiler characteristics.
> AC_C_CONST
> AC_TYPE_PID_T
> AC_TYPE_SIZE_T
> AC_STRUCT_TM
> 
> dnl Checks for library functions.
> AC_TYPE_SIGNAL
> AC_FUNC_STRFTIME
> AC_FUNC_UTIME_NULL
> AC_CHECK_FUNCS(fnmatch getcwd gethostname mkdir mktime 
> regcomp rmdir socket strdup strerror strstr strtol strtoul)
> 
> # Whenever both -lsocket and -lnsl are needed, it seems to be 
> always the
> # case that gethostbyname requires -lnsl.  So, check -lnsl 
> first, for it
> # to be in LIBS before the setsockopt checks are performed.  
> *However*,
> # on SINIX-N 5.43, this is false, and gethostent seems to be a better
> # candidate. So, let's use it below instead of gethostbyname, and see.
> # Stolen from GNU tar 1.12
> 
> AC_CHECK_FUNC(gethostent)
> if test $ac_cv_func_gethostent = no; then
>   AC_CHECK_LIB(nsl, gethostent)
> fi
> AC_CHECK_FUNC(setsockopt)
> if test $ac_cv_func_setsockopt = no; then
>   AC_CHECK_LIB(socket, setsockopt)
> fi
> 
> AC_OUTPUT(Makefile)
> ---cut here---
> 
> Thanks,
> 
> --Cornelius.
> 
> -- 
> /* Cornelius Krasel, U Wuerzburg, Dept. of Pharmacology, 
> Versbacher Str. 9 */
> /* D-97078 Wuerzburg, Germany   email: 
> phak004@xxxxxxxxxxxxxxxxxxxxxx  SP4 */
> /* "Science is the game we play with God to find out what His 
> rules are."  */
> 
> -- 
> leafnode-list@xxxxxxxxxxxxxxxxxxxxxxxxxxxx -- mailing list 
> for leafnode
> To unsubscribe, send mail with "unsubscribe" in the subject 
> to the list
> 

-- 
leafnode-list@xxxxxxxxxxxxxxxxxxxxxxxxxxxx -- mailing list for leafnode
To unsubscribe, send mail with "unsubscribe" in the subject to the list